94-95 Mustangs Tuning ResetEEC

From Mustang-Tech

How to Reset the EEC's KAM

  • If you are running a 94-95, load an A9L tune into slot #4 of the twEECer
  • If you have an A9L processor, load a J4J1 into slot #4 of the twEECer
  1. IGN on (tweecer switch is on #1-3)
  2. load new tune (switch still on #1-3)
  3. IGN off
  4. switch to #4
  5. IGN on (fan comes on)
  6. IGN off again, take key out
  7. switch back to #1-3
  8. start car, calcon (kams are all 1.0!)
  • * NOTE * Take in consideration , that if by any reason the Tweecer Knob stops working, the Tweecer will switch automaticaly to Number 1 So its recomended to Load the "Bad" Tune into other position than 1
Retrieved from "http://www.mustang-tech.org/wiki/94-95_Mustangs_Tuning_ResetEEC"